North Australian FISH FINDER TM forums

I read it as tho the hubs are the same,but finding matching 5 stud wheels is the issue.
I’m sure someone has some sitting around somewhere. Or may have one to match yours,maybe post up a picture of them, never know

You have interpreted correctly Mickkk. the 2 rims I had on the trailer when purchased have matching stud patterns, its just they are different widths.

Wouldn't be too concerned about rim widths captain but definalty spending the coin on brand new rims and tyres would give you peace of mind, just check the tyre dates if you get 2nd hand anything over 5 years and you might get into trouble

goodluck the punts lookin close to ready

Roget that B-Rad. Looking like new rims may be on the cards if the wreckers can't produce tomorrow or on the weekend. Cheers

Timbers level, new u-bolts in for side-timbers. Next is up on the ramps for a quick grind n paint at the back-end. Then time to sand and oil the timbers..

Ahhh...I love the smell of Ali-Brite cleaned aluminium in the arvo... Sanding hull for painting.

Sanded....oiled.. Ready for rego! Yay!

Looks great!

Captain6979 wrote:A nice lady gave me this Furuno LS-6100 sounder the other day, for free. Missing cords, so I might take it into In n Out n see if they can plug n play test it.

Keep going down to the ramp and hoy it of the pontoon. Keep it out of sun display fades altogether when it heats right up. Well priced at zero dollars.

Ha ha! Itll probably not even get used. Thinking I'll be loading up the navionics app for the phone.

Great to watch the progress

Not satisfied after outdoor oil.. Sanded back again with 60grit n then with 240 grit. 1st layer of Exterior Varnish Stain applied..

Ooh yeah....launch wheels...farewell waiting times at the ramp....

And with sealed bearings, axles intact, should be easy to come up with a nice easy design for easy removal, and storage whilst on the fish.

Brackets for swivel-arms going on..