where to buy marine ply?
- dirtyruiz
- Jedi Seadog
- Posts: 493
- Joined: Fri May 01, 2009 3:13 pm
- Contact:
where to buy marine ply?
Does anyone have any ideas where to buy marine ply apart from bunnings? Need a piece approx 700mm x 1500? I need the thicker type 19mm I think, could be thicker. Any advice appreciated
- 2rods
- Jedi Seadog
- Posts: 4918
- Joined: Sat Jul 08, 2006 10:38 am
- Location: Out fishing
Re: where to buy marine ply?
Maybe trade building supplies or Bianco ... They have form ply
2RODS
Depression is merely anger without enthusiasm.
If I can't be a good example, then I will just have to serve as a horrible warning...
As John Wayne once said:
"Life's tough......It's even tougher if you're stupid."
.........
-
- Jedi Seadog
- Posts: 645
- Joined: Tue Apr 29, 2008 4:26 pm
- Location: Darwin
- Contact:
Re: where to buy marine ply?
What you using it for?
I re did the floor in my boat with exterior ply I think, judt painted it and its been really good. 17mm maybe?
I am saying that as I have a full sheet sitting here that someone can have for $20.00 It might suit you mate, maight not.
In Leanyer either way
Chris
I re did the floor in my boat with exterior ply I think, judt painted it and its been really good. 17mm maybe?
I am saying that as I have a full sheet sitting here that someone can have for $20.00 It might suit you mate, maight not.
In Leanyer either way
Chris
-
- Jedi Seadog
- Posts: 3716
- Joined: Sat Sep 03, 2011 8:25 am
- Location: Darwin
Re: where to buy marine ply?
Hi Dirtyruize
Marine ply comes in 18,25mm 2400x1200.You can get form ply in 1800x1200, 17mm about $70 a sheet but most places wont cut marine or form because it stuffs saw blades ,anyway I,m in the timber game so if you want PM your # I,ll give you a call
Cheers
Jeffish
Marine ply comes in 18,25mm 2400x1200.You can get form ply in 1800x1200, 17mm about $70 a sheet but most places wont cut marine or form because it stuffs saw blades ,anyway I,m in the timber game so if you want PM your # I,ll give you a call
Cheers
Jeffish
-
- Platinum Member
- Posts: 164
- Joined: Wed Sep 21, 2011 8:35 pm
Re: where to buy marine ply?
Ive got 2 sheets of form ply if thats what your after.
- dirtyruiz
- Jedi Seadog
- Posts: 493
- Joined: Fri May 01, 2009 3:13 pm
- Contact:
Re: where to buy marine ply?
Thanks a lot guys, I need it for the cast deck. I just had the cast deck raised and the front end is too heavy so I want to replace the big ally hatch on the deck with a ply hatch. The ally hatch is extremely bl..dy heavy. Short story is the hatch is 885 x 675 and I need it to be strong enough for someone to stand on.
-
- Jedi Seadog
- Posts: 1692
- Joined: Sat Feb 12, 2011 8:13 am
- Location: HUMPTY DOO
Re: where to buy marine ply?
Must be bl..dy thick ally if it's heavier than 19mm ply
The past is history,the future is mystery,the moment is a gift and that's why it's called the present
-
- Jedi Seadog
- Posts: 1692
- Joined: Sat Feb 12, 2011 8:13 am
- Location: HUMPTY DOO
Re: where to buy marine ply?
Must be bl..dy thick ally if it's heavier than 19mm ply,sell it as scrap ,you'll probably get enough dosh to buy the ply
The past is history,the future is mystery,the moment is a gift and that's why it's called the present
- dirtyruiz
- Jedi Seadog
- Posts: 493
- Joined: Fri May 01, 2009 3:13 pm
- Contact:
Re: where to buy marine ply?
its reinforced to the sh!thouse, that's what is making it heavy. I'm not sure if the ply will work so I'll hang onto the door for now.
- troamaru
- Jedi Seadog
- Posts: 617
- Joined: Tue Aug 31, 2010 2:09 pm
- Location: Humpty Doo, NT
Re: where to buy marine ply?
Just use CD Ply and Norseal the poop out of it.. lasts longer than Marine ply and works out a hell of a lot cheaper. I have a piece of ply treated with norseal thats been out in the rain for ages and its still rock solid
- BlueyNT
- Seadog
- Posts: 241
- Joined: Fri Aug 26, 2011 8:39 pm
Re: where to buy marine ply?
My 4.2 stacer has 12mm exterior ply , the forward hatch is 600 x 500 and is plenty strong enough to stand on .
I have to replace one side of the floor under the console as it has abit of rot in it. I guess the factory didnt seal the ply properly or at all.
The edges is where the water will soak into the ply ,I plan to use exterior 12mm ply and seal the edges with linseed oil and marine varnish .
Exterior ply is around 75.00 a sheet , marine ply is three times the price.
Kev.
I have to replace one side of the floor under the console as it has abit of rot in it. I guess the factory didnt seal the ply properly or at all.
The edges is where the water will soak into the ply ,I plan to use exterior 12mm ply and seal the edges with linseed oil and marine varnish .
Exterior ply is around 75.00 a sheet , marine ply is three times the price.
Kev.
I'm not young enough to know every thing .
- troamaru
- Jedi Seadog
- Posts: 617
- Joined: Tue Aug 31, 2010 2:09 pm
- Location: Humpty Doo, NT
Re: where to buy marine ply?
lanolin is a really good sealer as well! But the old linseed oil works a treat to like bluey said.. It stinks but soaking them in old motor oil stops wood rotting as well that what we used to do when fencing paint the bottoms of the post with old oil..
-
- Jedi Seadog
- Posts: 3716
- Joined: Sat Sep 03, 2011 8:25 am
- Location: Darwin
Re: where to buy marine ply?
Hi guys.
Linseed oil used neat will not dry compleatly and there for is not the best for sealing timber that you want to glue carpet to,not having a go at your advise as it is still a great product but if you must use it make sure you mix it with about 20% pure gum turps (not minral turps) .This mix would be best used under the floor where your not going to carpet,but there are much better products on the market theses days .
Cheers
Jeffish
Linseed oil used neat will not dry compleatly and there for is not the best for sealing timber that you want to glue carpet to,not having a go at your advise as it is still a great product but if you must use it make sure you mix it with about 20% pure gum turps (not minral turps) .This mix would be best used under the floor where your not going to carpet,but there are much better products on the market theses days .
Cheers
Jeffish
- theodosius
- Jedi Seadog
- Posts: 3274
- Joined: Mon May 18, 2009 10:46 pm
Re: where to buy marine ply?
What would you seal it with if you need to glue carpet back down?
-
- Jedi Seadog
- Posts: 3716
- Joined: Sat Sep 03, 2011 8:25 am
- Location: Darwin
Re: where to buy marine ply?
Hi Theodosius
I use a product called Monocell exterior , I thin the first coat about 20% with minral turps makesure you cover all the edges with a good coat,allow the first coat to dry for at least 48hrs. Then apply the 2nd coat neat (not thinned) allow anorther 48hrs to dry.
The drying times at this time of year can be longer due to high humidty, might suggest you wait a week before gluing the carpet down,make sure to use a quality contact adheasive (selleys kwickgrip)
After you get carpet down I,d apply a 3rd coat to the underside
Hope this helps I,v done 3 floors this way with no worries
Cheers
Jeffish
I use a product called Monocell exterior , I thin the first coat about 20% with minral turps makesure you cover all the edges with a good coat,allow the first coat to dry for at least 48hrs. Then apply the 2nd coat neat (not thinned) allow anorther 48hrs to dry.
The drying times at this time of year can be longer due to high humidty, might suggest you wait a week before gluing the carpet down,make sure to use a quality contact adheasive (selleys kwickgrip)
After you get carpet down I,d apply a 3rd coat to the underside
Hope this helps I,v done 3 floors this way with no worries
Cheers
Jeffish
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 1211 Views
-
Last post by jabsy
-
- 4 Replies
- 2216 Views
-
Last post by Carrall88
-
- 7 Replies
- 1560 Views
-
Last post by chanos
-
- 0 Replies
- 668 Views
-
Last post by tugger1
-
- 0 Replies
- 782 Views
-
Last post by frenchy123