Page 1 of 1

Prop issue Suzuki DF 60A

Posted: Sun Dec 08, 2019 2:26 pm
by JeffP
Hi Guys & Gals,
I’m new on here so not sure where to ask this. I have a Quintrex Renegade 440 with a 2017 DF60A T/S.
I have a problem getting out off the hole, appears to be Venting. Flies when it gets out off the hole.
The prop is an alloy 11 1/4 X 15. I was wondering what prop others are using with the same setup.
Cheers
Jeff

Re: Prop issue Suzuki DF 60A

Posted: Sun Dec 08, 2019 5:55 pm
by Matt Flynn
Might need to drop the engine mount down a hole? It is possible another prop won't vent, but I'd try dropping it first. Or you could put on a wing, but they can change the handling.

Re: Prop issue Suzuki DF 60A

Posted: Sun Dec 08, 2019 9:30 pm
by JeffP
Thanks Matt, I’ll give it a go, there is still one hole to drop it down.

Re: Prop issue Suzuki DF 60A

Posted: Mon Dec 09, 2019 8:41 am
by NinjaFish
If that doesn’t make a difference my guess is its over pitched.

Painful stuff playing with different props even when you use the recommended ones.

Here’s a link I use that may help you but better if you can visit where it was sold from.

https://www.rubexprops.com/boat-propell ... %20Spline)