Hi Guys & Gals,
I’m new on here so not sure where to ask this. I have a Quintrex Renegade 440 with a 2017 DF60A T/S.
I have a problem getting out off the hole, appears to be Venting. Flies when it gets out off the hole.
The prop is an alloy 11 1/4 X 15. I was wondering what prop others are using with the same setup.
Cheers
Jeff
Prop issue Suzuki DF 60A
- Matt Flynn
- Site Administrator
- Posts: 16186
- Joined: Thu Jan 01, 1970 9:30 am
- Location: Somewhat Southerly
- Contact:
Re: Prop issue Suzuki DF 60A
Might need to drop the engine mount down a hole? It is possible another prop won't vent, but I'd try dropping it first. Or you could put on a wing, but they can change the handling.
-
- New Member
- Posts: 2
- Joined: Sun Dec 08, 2019 1:57 pm
Re: Prop issue Suzuki DF 60A
Thanks Matt, I’ll give it a go, there is still one hole to drop it down.
-
- Jedi Seadog
- Posts: 888
- Joined: Sun Aug 27, 2017 8:20 am
- Location: Darwin
Re: Prop issue Suzuki DF 60A
If that doesn’t make a difference my guess is its over pitched.
Painful stuff playing with different props even when you use the recommended ones.
Here’s a link I use that may help you but better if you can visit where it was sold from.
https://www.rubexprops.com/boat-propell ... %20Spline)
Painful stuff playing with different props even when you use the recommended ones.
Here’s a link I use that may help you but better if you can visit where it was sold from.
https://www.rubexprops.com/boat-propell ... %20Spline)
-
- Similar Topics
- Replies
- Views
- Last post