FAD # 2 bring your snake net!

Gracie · Post by **Gracie** » Thu Jan 11, 2007 8:09 am

Nice work Guys.
I am keen to help in any way I can, just tell me where and when.

keith daley · Post by **keith daley** » Fri Jan 12, 2007 5:36 am

i have a large tow rope at home and ill get a tow point for u how thick is the hull at frount and ill get bolts to suit

BarraBeast · Post by **BarraBeast** » Fri Jan 12, 2007 7:24 am

dont know how think the bow is but your welcome to drill it.

BarraBeast · Post by **BarraBeast** » Tue Jan 16, 2007 2:17 pm

OK Crew,

I'm aiming for the week of 22/01 to 29/01 to do the wood removal and hull prep.

As everyone has different work hours we'll can just spread the work over a few days and do some work after work hours.

some of the equipment needed - water pump(2rods), utes/trailers, sikaflex(I've got one tube), large massonary drill bits, extention cords, ladders, personal safety gear(eye, foot, hand and skin protection), hammers(nail removal), ropes.

I reakon from tuesday onwards will be the go. I'll post some times this weekend. Address is Blue Point Fabrications 660 Stuart Hwy Berrimah. Access is from the rear of the yard via Vigilant Lane(behind Harvey Norman).

2rods · Post by **2rods** » Tue Jan 16, 2007 2:54 pm

Yep water pump is on its way. and a ladder and ute.

I have wednesday, Thursday and Friday off so wed,thursday is all yours

2rods

dodgyone · Post by **dodgyone** » Tue Jan 16, 2007 5:14 pm

How about Australia Day? Anybody for an early assault then Forum BBQ lunch and a light beer or two? With JJJ pumping of course.

BarraBeast · Post by **BarraBeast** » Tue Jan 16, 2007 6:40 pm

Aussie day is looking good.

Shane Doevy · Post by **Shane Doevy** » Tue Jan 16, 2007 7:06 pm

Working next week but ill be there with bells on when i can beast - post some times that you will down there and ill pitch in - aussie day should be no worries if thats when ya wanna do it.

Cheers
Shane

harmsey · Post by **harmsey** » Tue Jan 16, 2007 7:26 pm

damn it im off to QLD on 18th and return on the 29th

but am available in the afternoons and weekends after that if you dont get it done

have a few tools mainly woodworking stuff. if required

harmsey

Chronic · Post by **Chronic** » Tue Jan 16, 2007 11:24 pm

Be there aussie day after lunch fella's, cant miss backyard cricket with the family in the morning

or can i.............

Timbo · Post by **Timbo** » Mon Jan 22, 2007 2:29 pm

Anything happening on Wednesday or Thursday?

BarraBeast · Post by **BarraBeast** » Wed Jan 24, 2007 12:52 pm

There's a few logistical problems with moving the hull. The transport company is yet to get come up with a plan, initial conversations were positive, however the plan struck a hitch in the details. So with this we'll have to cancel OZ day working bee.

Sorry for the mess around. Until there's a solid plan in place to get the hull in we'll have to hold off.

BarraBeast · Post by **BarraBeast** » Mon Aug 27, 2007 9:37 pm

FFF FAD # 2 is now going ahead.

Calling all FFF's, it's time to send another broken dream to a watery grave.

Shorelands has given the big 'Go Ahead'.
DIPFM has given the 'Go ahead'.

task list -
clean it out and remove rubbish
check for any cracks(2rods personal favorite task)
install a tow point
paint the cr.p out of it with FFF crazy slogans
when ready to float, get the Harbour Master is give Towing clearance.
organise a tow boat, any FFF's with a big motor?
organise drop point, Hudson creek private wharfs.

sounds too easy for a bunch of fish crazy locals!

2rods · Post by **2rods** » Mon Aug 27, 2007 9:39 pm

Let me know when BB and If I have the day off I will be there with bells on (and butt crack out

) I want to see this one go down though....I MISSED the last one

jasonmcc · Post by **jasonmcc** » Mon Aug 27, 2007 9:40 pm

Im keen to help out. Can help with the cracks, tow point and clearing. LEt us know when and where.

Cheers

Jason

North Australian FISH FINDER TM forums

FAD # 2 bring your snake net!

wreck prep

Sink It