North Australian FISH FINDER TM forums

Have the following suzuki engine interface cables for sale for anyone thats looking to hook up to NMEA 2000 to get fuel flow / temp / etc readings.

990C0-88134 - Modular Instrument System Engine Interface $50
990C0-88135 - SIMS Adapter to SDS $25
990C0-88141 - Reverse K8 Adaptor $50

Does the interface cable display your trim setting on the MFD??

ken_gilchrist wrote:Does the interface cable display your trim setting on the MFD??

You confused me on this one? What is an MFD?

I was using the cables to get fuel flow, km/l, l/hr temp, trim and all those readouts on my HDS10's via NMEA 2000 network.

The cables were the connection between the outboard and the NMEA 2000 network.

Outboard NAUGHTY Engine Interface Cable NAUGHTY NMEA 2000 NAUGHTY HDS10

Multi Function Display. (HDS)

Do you have a pic of the interface cable? I want to see if it the same plugs as my outboard.

Cheers

I'll take the photos tonight.

Do analogue gauges still work with these cables? If so I'll take them off your hands

Here are the pics. Sorry for the delay.

990C0-88134 - Modular Instrument System Engine Interface $50

990C0-88135 - SIMS Adapter to SDS $25

990C0-88141 - Reverse K8 Adaptor $50

Note this is required for older engines. 2007 and older have the round connector going to the engine.

Aquarat88 wrote:Do analogue gauges still work with these cables?

Yes, but there is one catch.

The trim connector on the engine will already be connected to those round analog gauges.
If you want to show trim on your HDS, you would either need to disconnect the trim plug and connect it to the trim plug on the engine interface cable
OR
You could try and rewire the trim plug so that it splices into both the round analog gauge and the engine interface cable but I never bothered.

Aquarat88 wrote:If so I'll take them off your hands

Ken_Gilchrist was in first so he's on first dibs.

Sacky wrote:Ken_Gilchrist was in first so he's on first dibs.

The plug is differant to my engine mate. Yes the reverse adapter will work but I already have one engine interface but I can't get the trim data to show (Your explination helped me a bit as to why).
That was the interest in the ones you had. My cable does not have the two "pig tails" coming off it though (one for engine and one for trim). So you can part with all of them and not be stuck with two you can't sell Aquarat88 can take them.


I appreciate the "first in first served" approach though.

I would like to see up close the wiring schematics and how it all hooks up Aquarat88 if you dont mind. I might look into splicing a pigtail to the current interface I have to see if that fixes the trim bizzo.

is it still for sale i am very interested aas i have just upgraded my engine to a 2012 suzuki df70a

Hi,

Is the cable still for sale?

Is the 990c0-88134 interface cable still for sale?

Sold happy to pay you for them 0403 581 136