Page 1 of 1
Chasing a handpiece from a GME GX600A VHF
Posted: Wed Apr 19, 2017 7:12 pm
by jabsy
Hello all,
Does anybody have a handpiece left over from a broken GME GX600A VHF head unit?
Mine has corrosion evident where the coily cable enters the hand held unit, I cant transmit but can receive via the mic on the head unit. I'd like to try it out and see if I can get away without buying a whole new radio...
jabsy
Re: Chasing a handpiece from a GME GX600A VHF
Posted: Wed Apr 19, 2017 7:57 pm
by NT Wombat
Pretty sure I have one I'll check in the morning and confirm
Re: Chasing a handpiece from a GME GX600A VHF
Posted: Wed Apr 19, 2017 8:05 pm
by jabsy
ace, cheers.
Re: Chasing a handpiece from a GME GX600A VHF
Posted: Thu Apr 20, 2017 5:44 am
by fff1964
let me know if you get it think i have one too.
Cheers
Re: Chasing a handpiece from a GME GX600A VHF
Posted: Fri Apr 21, 2017 7:14 am
by jabsy
Any luck guys? Still looking.
Re: Chasing a handpiece from a GME GX600A VHF
Posted: Fri Apr 21, 2017 2:18 pm
by NT Wombat
I've got one you can have - can pick up in howard springs sunday if you like. Is your plug in or soldered in? Mine seems to be soldered.
Re: Chasing a handpiece from a GME GX600A VHF
Posted: Sat Apr 22, 2017 4:23 pm
by jabsy
Cheers Wombat, but mine was the plug-in. It has an RJ12 clip behind the rubber boot. I think I know yours, has a screw-off connector. Thats probably the GX600 model.
I managed to pick one up from the Yacht Shop yesterday for about $70. Cheaper than a new radio. Dont think I will buy GME again tho.